![]() ![]() Note that in this setup the NAS won't have any internet access. Now you are done and should be able to log in at. At that point, you should be able to run QFinder and discover the NAS, but the IP address of the NAS will still be generally invalid - go ahead and use the QFinder to set it to 192.168.2.11. You should enter the same 255.255.255.0 for the subnet mask, but leave the default gateway (and generally any other settings) blank. You could choose 192.168.2.10 for the Mac and configure it. In this example, you could choose 192.168.2.x and make up two addresses. Let's say you also get 192.168.1.x and the same subnet mask, which are common (but not to be taken for granted) router defaults. Their examples show what it would look like with an IP address of 192.168.1.112 and the subnet mask of 255.255.255.0. Start with #3, to determine what not to choose: you can use the instructions here for finding your internal address. The addresses need to 1)follow some rules about the address ranges you should use 2)be on the same subnet 3)not conflict with the address range used by your wifi router that the Mac is connecting to. Sounds like you attempted something along those lines, but didn't pick suitable values. This can work, but you need to configure both the Mac's ethernet interface and the NAS with static IP addresses. The network consists of the Mac and the NAS, both of which are trying to be DHCP clients, without an available DHCP server. The problem is that right now, as you have described things, there is no DHCP service on your ethernet network. I played around an set it to 111.111.111.111 as IP address.įunny thing is now from time to time Qfinder sees my NAS with IP 169.254.100.100 - and I can change its Network configuration via Qfinder.īut sometimes I cant connect because when I enter my password I get the error "receiving answer from server failed" Through QVR Pro, you can even store recordings for playback, allowing you to build a surveillance system with minimum budget.I set the Mac system preferences for networking to use DHCP with manual address on the Ethernet port. Simply connect it to your TS-653B, and you can view real-time images without installing any software. With the QUSBCam2 App, you can use a USB camera as an ONVIF network camera. Additional functions like batch-adding & -editing cameras and searching for cameras across different LANs further reduce the money and time costs of deploying and maintaining a complete surveillance system. QVR Pro features a flexible monitoring interface that allows adjusting the proportion and monitor view of IP cameras, supports an upgraded timeline feature that provides instant video search and quick view identification in live monitoring mode, and allows for monitoring views and playing back images without switching between windows. You can arrange a dedicated, independent storage space for surveillance data on the NAS and leverage the advantages of scalability and storage manageability from QTS. The TS-653B supports QVR Pro (Beta) that integrates QNAP’s professional QVR system into the QTS operating system. It operates on 100-240 VAC and includes two Ethernet cables, flathead screws for 2.5″ drives, an IR remote control, a power adapter, and a power cord. The TS-653B is engineered for quiet operation, generating 19.6 dBA at low speeds. ![]() Failover and dual IP are also supported to ensure continuous system operations, and data may also be made remotely available through the free iOS and Android applications. Network connectivity is achieved via two integrated Gigabit Ethernet ports, with link aggregation to increase the total data transmission potential. The NAS offers maximum read, write, and transfer speeds of 225 MB/s with AES-NI encryption acceleration.įive USB 3.0 Type-A ports allow the enclosure to be connected to your Windows, Mac, or Linux/UNIX system. Its CPU is a quad-core 1.5 GHz Intel Celeron J3455, and its 4GB of DDR3L RAM allows frequently-used files and applications to be quickly accessed. The TS-653B runs the QTS 4.3 operating system, a browser-based operating system which helps to simplify managing your QNAP NAS. Many free apps are available for download from the App Center, including Notes Station 3, QmailAgent, and Qcontactz. Its four drive bays support 2.5″ and 3.5″ SATA III (6 Gb/s) hard drives and SSDs. The TS-653B 6-Bay NAS Enclosure from QNAP is designed to be used for backup, synchronization, remote access, and home entertainment. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |